Roadworthiness

How Often Should HGVs and Trailers Have a Safety Inspection? PMI Intervals Explained

There is no single legal interval. Here is what DVSA’s guide says about setting and reviewing inspection frequency, the examples it gives, and the records you must keep.

Published 6 November 2026Reviewed by HGV Consult7 minute read

“How often should we inspect our vehicles?” is probably the most common maintenance question operators ask, and the honest answer is that there is no single legal interval. DVSA expects you to choose a frequency that fits your vehicles and the work they do, to write it down, and to be able to defend it. This guide explains what DVSA’s Guide to Maintaining Roadworthiness says about safety inspection (preventive maintenance inspection, or PMI) intervals, and how to set and review yours.

Is there a fixed interval?

No. The guide says an inspection frequency would normally range between 4 and 13 weeks. Where you land in that range depends on how much wear the vehicle is likely to suffer, not on a number someone has chosen for convenience. The six-week inspection that many operators use is common, but it is a habit and not a rule. It may be right for you, and it may be too long or too short.

What should decide your interval

The guide asks you to consider the likely mechanical wear, including:

  • the age and type of vehicle
  • the manufacturer’s recommendations
  • the nature of the load and any fitted equipment
  • the type and range of operation
  • the terrain and environment
  • distances, speeds and journey times

Examples from the guide

The guide gives examples to show how that works in practice. Use them as a guide to the thinking, not as a menu to copy from:

  • Lightly loaded vehicles in easy conditions: 10 to 13 weeks.
  • General haulage and trunking: 6 to 10 weeks.
  • Arduous work with constant heavy loads: 4 to 6 weeks.
  • Off-road or difficult conditions: 4 weeks.
  • Vehicles or trailers 12 years old or more: 6 weeks, which may be extended where mileage is low and use is light.

Can you use mileage instead of weeks?

Yes, but mileage on its own is not enough. A mileage-based interval has to be linked to a time limit, so a vehicle that does little mileage is still inspected on schedule. You should record the longest equivalent time interval (up to 13 weeks) on your operator licence record in the Vehicle Operator Licensing system, and tick the mixed frequency box.

Trailers you do not control

Where you use third-party trailers that are not on your own inspection schedule, the default interval should be no more than 13 weeks. If you keep a trailer from outside the UK for longer than that, you need a process that makes sure it is inspected to your stated frequency.

Reviewing and changing the interval

An interval is not set once and forgotten. The guide says that after you change an interval you should monitor roadworthiness monthly, and that new operators should be cautious and inspect more often, not less. If your inspections keep finding the same defects, that is the evidence that the interval, or the standard of the inspection, needs to change. If you lengthen an interval, you should be able to show the data that justified it.

What every inspection must record

DVSA will ask to see the records, so each inspection record should show:

  • the operator’s name, and the date and week number of the inspection
  • who carried it out and where
  • the vehicle or trailer identity, with make and model, and the odometer reading where appropriate
  • the items inspected and the condition of each
  • any defects found
  • the inspector’s name and signature
  • the repairs made and who did them
  • a named, signed and dated declaration that the defects are repaired and the vehicle is roadworthy

The vehicle should be declared roadworthy before it goes back into service. Keep the inspection and repair records for at least 15 months.

Brake performance at every inspection

The guide expects a brake performance assessment at each safety inspection, using a roller brake test, a decelerometer with temperature readings, or an electronic brake performance monitoring system (EBPMS) for trailers. A laden roller brake test is described as the most effective method. Where EBPMS is not used, the guide expects at least four laden brake tests spread evenly across the year, and the annual test can count as one of them. Our guide to EBPMS and roller brake testing explains the options and the evidence to keep.

How to spot a weak PMI system

  • Every vehicle on the same interval, whatever it does.
  • No written reason for the interval you chose.
  • Inspections that slip by days or weeks with no explanation.
  • Records without a signed roadworthiness declaration.
  • Brake tests missing, or results that are not recorded.
  • Defects found at inspection that driver walkaround checks should have caught.

That last point matters because inspections and daily checks work together. Our guides to what DVSA expects from a maintenance system and when to VOR a vehicle cover the full system.

Where to get help

If you are not sure your intervals would stand up to an examiner’s questions, our maintenance and roadworthiness support reviews your system, and a remote compliance audit tests your records against what DVSA expects. An external Transport Manager can also take responsibility for setting and reviewing your inspection programme.

Important to remember

This article is general information only and is not legal advice. The intervals and examples above come from DVSA’s Guide to Maintaining Roadworthiness, which is updated from time to time, and the intervals you declared on your operator licence still apply. Check the current guide and your own licence undertakings before relying on this article.

General information: Operator licensing requirements depend on the facts of the operation. Always check current official guidance and obtain advice appropriate to your circumstances.

Relevant HGV Consult service

Need practical help with this?

See our Transport Compliance Support service, or tell us briefly what support you need.