Running a lorry into London means meeting rules that apply almost nowhere else in the country. Three of them catch operators out most often: the Direct Vision Standard (DVS), the Low Emission Zone (LEZ) and the Congestion Charge. They are run by Transport for London (TfL), they apply to different vehicles, and each has its own penalty. This guide sets out what each one covers, what to put in your records, and where to check the current detail, because charges and conditions change.
The Direct Vision Standard and the HGV safety permit
The DVS applies to lorries over 12 tonnes gross vehicle weight that operate on public roads in Greater London. Each vehicle needs a TfL HGV safety permit, and the permit depends on the vehicle’s star rating, which measures how much the driver can see directly through the cab windows. Ratings run from zero to five stars.
- Three stars or more. Since 28 October 2024 this is the minimum rating. A vehicle that meets it can be permitted without extra safety equipment, but the permit must be in place before it enters London.
- Below three stars. The vehicle can only be permitted if it meets TfL’s Progressive Safe System. TfL lists the required measures as a nearside camera monitoring system, Class V and VI mirrors or a camera system in their place, a blind spot information system, a moving off information system, side under-run protection on both sides, an audible left-turn warning and external warning signs.
TfL uses cameras to check vehicles against its permit records, and the penalty charge for a vehicle without a valid permit is £550, reduced to £275 if paid within 14 days. Exemptions exist for some vehicle types, such as emergency vehicles and some specialist vehicles, so check TfL’s list before assuming your vehicle is or is not covered. The full conditions are on TfL’s Direct Vision Standard and safety permit page.
The Low Emission Zone
The LEZ covers Greater London and applies to lorries, heavy vans and other specialist vehicles over 3.5 tonnes gross vehicle weight. The standard for lorries is Euro VI for nitrogen oxides and particulate matter. TfL’s published charges for a lorry that does not meet it are £100 a day if it meets Euro IV for particulate matter but not Euro VI, and £300 a day if it does not meet Euro IV for particulate matter.
Vans and cars are dealt with under the separate Ultra Low Emission Zone rules, so a mixed fleet of vans and lorries needs to check each vehicle against the right scheme. TfL’s Low Emission Zone payment page shows the current daily charges and how to pay.
The Congestion Charge
The Congestion Charge applies to vehicles driven in the central London charging zone at certain times. It is separate from the LEZ and DVS, so a vehicle can be fully compliant with both and still owe the charge. Check the current rate, the hours and the zone boundary on TfL’s website before you plan central London deliveries, and make sure someone is responsible for paying it. Our guide for central London operators covers the local picture.
The London Lorry Control Scheme
The London Lorry Control Scheme restricts heavy lorries, over 18 tonnes, from using certain London roads at night and at weekends, unless they hold a permit. It is run by London Councils, not TfL. If your work includes early starts, late finishes or Saturday deliveries, check whether your route uses controlled roads.
Putting it into your compliance system
These schemes are separate from your Operator Licence, but a DVSA examiner or a Traffic Commissioner will expect to see that you know which rules apply to which vehicles. A few habits make that easy to show:
- Record the permit and star rating on the vehicle file. Note the DVS permit number, the star rating and any Progressive Safe System equipment fitted, so the information is not held in one person’s head.
- Check the LEZ standard for each vehicle. Record the Euro emissions standard against each lorry over 3.5 tonnes, and note any vehicle that should not be sent into London.
- Include the safety equipment in daily checks. Cameras, sensors, mirrors and audible warnings are safety equipment. A fault should be reported and recorded like any other defect.
- Check hired and borrowed vehicles. Before a hired lorry goes into London, confirm that the permit is in place and who is responsible for it.
- Tell drivers in writing. Drivers need to know which vehicles can go where, and who to call when a vehicle is turned back or a charge notice arrives.
- Deal with penalty notices promptly. A notice that sits in an inbox grows quickly, and a pattern of them says something about your systems.
Operators who run into London from the edges of the capital will find the same issues come up in each area. We have written local guides for operators in Barking, Dagenham and Havering, Newham and Tower Hamlets, Enfield and Haringey, Waltham Forest and Hackney, Brent, Ealing and Park Royal, Hounslow and Hillingdon, Croydon and Sutton, Bexley and Greenwich, Southwark, Lambeth and Lewisham and central London, and a general guide to operating in Greater London.
Where to get help
If you are not sure which rules apply to your fleet, a remote compliance audit can check your vehicle files and systems against what you are expected to have. Our transport compliance support can help you put the right checks and records in place, and an external Transport Manager can keep them in order once they are set up.
Important to remember
This article is general information only and is not legal advice. It is based on information published by Transport for London, which changes from time to time. Star ratings, equipment requirements, charges and exemptions can change, so check TfL’s current guidance before relying on this article.