Every digital and smart tachograph keeps its own record of time, and it is not necessarily the time on your wristwatch. That catches out drivers twice a year when the clocks change, and it catches out operators who read a printout or a download without knowing which clock it uses.
This article explains the difference between the time a tachograph records and the time it displays, what is safe to change, where manual entries go wrong and what we recommend.
What time does a digital tachograph record?
Digital and smart tachographs record in UTC, Coordinated Universal Time. For practical purposes UTC is the same as GMT, and it never changes for daylight saving. The internal clock does not move when the clocks go forward in March or back in October.
Activities stored on the vehicle unit and the driver card are held in UTC, and the times printed on a tachograph printout are in UTC too. Tachograph analysis software normally works from that UTC data and can show it converted to local time, so it is worth checking which of the two your reports are showing.
Recorded time and displayed time are different things
The display is a separate matter. On most units the screen can show either UTC or local time, using a local time offset that is set in the menu. Changing the offset changes what you see on the screen and the time used when a driver makes a manual entry. It does not change what is recorded. On many units a small symbol appears beside the time when local time is being displayed.
For UK operators the difference is simple:
- in summer (British Summer Time): UK local time is one hour ahead of UTC; and
- in winter: UK local time and UTC are the same.
The clocks go forward on the last Sunday in March and back on the last Sunday in October. In 2026 the clocks went back on 25 October, so UK local time matches UTC again until the clocks go forward in March.
Should you change the displayed time?
There are two sensible choices, and either is legal. What matters is that you choose one, apply it to every vehicle and make sure drivers know the rule.
Leave the display on UTC
- For: there is nothing to change twice a year, the screen matches printouts and downloads, and there is no risk of a vehicle being missed.
- Against: in summer the screen is an hour behind the clock on the wall, so drivers have to convert, particularly for manual entries.
Set the display to local time
- For: the screen matches the clock on the wall, which many drivers find easier.
- Against: someone has to change the offset on every vehicle at each clock change. If a vehicle is missed, manual entries on it will be an hour out. Printouts and downloads are still in UTC, so drivers and managers still have to convert when they read them.
Our advice is to leave the display on UTC unless you have a good reason not to. It gives you one rule to teach and nothing to forget at the clock change. If your drivers prefer local time, that is fine, but put a clock-change check in place for every vehicle and write the rule down.
What you should not change: the clock itself
The displayed time is one thing. The tachograph’s internal UTC clock is another. The internal clock is set and checked by an approved tachograph workshop at calibration, and it is not something a driver should adjust. A clock that is clearly wrong is a fault to report to the workshop, not something to fix by hand.
Manual entries: where the mistakes happen
When a driver inserts their card, the unit asks them to enter any activity since the card was last removed. The times entered must be in the same time basis the unit is showing. If the display is on local time, enter local time. If it is on UTC, enter UTC.
In summer a driver who enters local time on a unit showing UTC will be an hour out. That can show up as an unexplained gap, an overlap or a false infringement. Tell drivers to look at the time on the manual entry screen and use that as their reference, and keep printouts to support any entry that is queried.
Clock-change weekends and night work
The recorded data is not affected by the clock change, because it is in UTC. The people reading it are. A night shift that spans the October change is an hour longer than the clock suggests, and a night shift that spans the March change is an hour shorter. Check that planning, payroll and your analysis software are using the actual hours worked, not just the times on the clock.
It also matters for the Working Time rules. For UK goods vehicle drivers, night time is 00:00 to 04:00, and night workers are limited to 10 hours of work in any 24-hour period unless a collective or workforce agreement allows otherwise. Night time is a local clock idea, so in summer 00:00 local time is 23:00 UTC. Make sure your software converts to local time before it checks night work. Our compliance software, OperatorSafe, is built to show times in UK time rather than UTC, so Transport Managers are not left converting by hand.
Older analogue tachographs
Analogue tachographs do not record in UTC. They have to be set by hand to the official time of the country where the vehicle is registered, and many cannot be turned back, so the usual method is to advance the clock by 23 hours. Check am and pm carefully, because the 12-hour dial looks the same for both.
A simple policy for your drivers
- decide whether displays are left on UTC or set to local time, and write it in your driver handbook;
- if you use local time, check every vehicle after each clock change and keep a record that you did;
- tell drivers which time to use for manual entries;
- make sure drivers and managers know that printouts and downloads are in UTC;
- report a tachograph clock that is clearly wrong to your calibration workshop;
- check that your analysis software converts to local time correctly, with a sample check each time the clocks change; and
- review night-shift planning around the clock changes.
The time basis is only one part of tachograph compliance. Our article on smart tachographs and who needs them covers the units themselves, and vans in Europe and the July 2026 rules covers who now needs a tachograph. For the official rules, see the DVSA tachograph rules for goods vehicles.
Need help with tachograph compliance?
If you would like your tachograph analysis, driver briefing and download routine reviewed, our transport compliance support and remote transport compliance audits can help you find gaps before DVSA does. If you would rather have the downloads analysed for you, OperatorSafe reads driver and vehicle downloads and flags infringements for the Transport Manager to review.
Request a call back to discuss your vehicles, your drivers and the support you need.